Remove the power supply plug from the outlet, Maintenance, Changing the needle – Brother X L 2010 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MAINTENANCE

Changing the needle

• Remove the power supply plug from the outlet.

• How to check the needle.

1. Remove the needle

Lower the presser foot

loosen the screw,

and

Inserting the needle

With the flat side facing back,

insert the needle as far as it

will go against the needle

stopper. Tighten the screw.

for smooth sewing.

as shown
right.

in illustration at