Installing the mf07000 series dos tool, Optional accessories, Memory board – Brother MFC 7000FC User Manual
Page 37: Optional memory for the fax operations, Installing the mfc-7000 series dos tool
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
"T~
rf«— ------- ------------------- ""T
r-
S E T T I N G U P T H E M p C f A N D C O M P U T E R T O W O R K T O G E T H E R
***
......'
j
Installing the MF07000 Series DOS Tool
Use these tools only in the DOS environment. You cannot use these tools while
Windows® is running. When you print in DOS mode, select an EPSON ESC/P
(LQ-510, LQ-850, LQ-2550) compatible emulation driver in your application.
Insert the supplied CD-ROM labeled “CD-ROM 1" into your CD-ROM drive.
M-
TVpe
CD X:\MFLPRO\DISK6\DOSTOOL
S TVP6 DOSETUP, then press |Enter|. The main screen appears on your
computer.
H- Make your selection from the list above.
NOTE: Before printing, you must set the paper size in this utility and in your
DOS application.
Optional Accessories
Memory Board_____________________
The memory board is installed on the main controller board inside the MFC.
When you add the optional memory board, it increases the performance for fax
operations.
Optional Memory for the Fax Operations
The MFC 7000FC and MFC 7200FC can recognize 1 MB (MEIOOO) or 2MB
(ME2000) of Optional Memory. Be careful to purchase the appropriate memory
board.
Additional memory for the fax will expand the memory used for sending and
receiving faxes.