Brother MFC 7000FC - Manual (Page 28)

You can use chain dialing to store long dialing sequences. For example, to store
9 1 201 555 1234 987 65 4321, divide the number into two parts. Store
the first part as a Chain type number (this tells the system that the dialing
sequence is not complete).
CHAIN —9 1 201 555 1234
The last part of the One-Touch number must be stored as any of the other
following three types.
FAX or F/T or m — 987 65 4321
Now, when you dial, just press the two keys (one after the other, in order) where
you’ve stored the two parts of the number.
If you are using Chain Dialing with a credit card number, do not send an
electronic cover page. The credit card number will ^pear on it.
One Touch Dialing
Pick up the handset—OR—Press iSpeoker Phone].
l2 When you hear a dial tone, press the One Touch key of the location you
want to call.
If you try to use a One Touch location with no number stored in it, you hear a
warning sound, and the screen displays NOT REGISTERED. The display returns
to normal after two seconds. To see all your numbers, print the All Dial Report
(See Operations Manual, p.ll).
Storing Speed Dial Numbers___________
You can store Speed Dial numbers, when you dial by pressing only three keys.
MFC 7000FC has 56 Speed Dial locations, and MFC 7200FC has 100. Even if you
lose electrical power, numbers stored in memory will not be lost.
^ Press [Functionl.
(T|, (T|,
[
2
]. The screen prompts you to enter a location.
SPEED-DIAL?
n_
2 Use the keypad to enter a 2-digit location (01 - 56 or 00). The digits 00
indicate location 100 on the MFC 7200FC. The screen displays your entry,
then prompts you to enter the number you’re storing.
C
it05
ENTER 8i SET