Brother MFC 7000FC - Manual (Page 24)

C H A P T E R T W O
• --------------------------------------------
:4SiaiA^.^2
Special characters and symbols
Press * for (space) ! “ # $ % & ‘ ( ) * + , - . /
Press # for ;;< = >? @ [] ^ _
Press 0 for A E O U A g ^ i O
NOTE: The Telephone Consumer Protection Act of 1991 makes it unlawful for
any person to use a computer or electronic device to send any message via a
telephone MFC unless such messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first page of the transmission, the date
and time it is sent and an identification of the business or other entity or other
individual sending the message and the telephone number of the sending
machines or such business, other entity, or individual. In order to program this
information into your MFC, you should complete the steps described on page 18
and 19 .
■ The telephone number you enter is used only for Call Back Message and
Cover Page features.
■ If you do not enter a fax number, no additional information can be entered.
■ To enter a space, press®.
■ If your Station ID has already been programmed, the screen prompts “ 1” to
make a change, or “2” to exit without changing.
Setting the Answer Mode
See
Distinctive
Ringing
p.27
and
Receiving
Faxes in
Operations
Manual
PR 3638
The lighted indicators mean: o = not selected, = is selected and lit
Manual—You must answer all calls yourself. If you hear fax tones, press to
begin receiving the fax, then hang ip. You can ase this mode with Distinctive Ringing.
(FAX and F/T lights are off.)
0 FAX
1 MsgCtr
O FA
FAX —The MFC automatically answers every call as a fax call. You cannot
receive a voice call, but you can dial out and make a voice call. (Only the FAX
light is on.)
• FAX
I MsgCtr
O F A