Brother MFC 7000FC - Manual (Page 26)

C H A P T E R T W O
See
Operation
from
Extension
Telephone
and
For F/T
(Fax/Tel)
Mode Only
in the
Operations
Manual
PR 36-37
Setting Ring Deiay
The Ring Delay setting determines the number of times the MFC rings before it
answers. If you have extension phones on the same line as the MFC, set the Ring
Delay to 4.
1^- Press |Fun(tion|.
rn. in. [Tl.
# Press 0 or (T] to select how many times the line rings before the fax
machine answers (00 - 04). If you select 00, the line doesn’t ring at all.
Press ® when the screen displays your selection. %
14* Press W to exit.
Setting F/T Ring Time
You need to determine how long the MFC will send you its special double ring
when you have a voice call. This ringing happens after the initial ringing from
the phone company. Only the MFC rings, for 10,20,30, or 60 seconds; no other
phones on the same line ring the special double ring. However, you can answer
the call on any phone on the same line as the Multi-Function Center.
14 Press [Functionl. rn. (Tl. m.
Press 0 or [►] to select how long the MFC will ring to alert you that you
have a voice call.
Press 0 when the screen displays your selection.
2
RING TiriE:20 SEC
li» Press W to exit.
Now, when a call comes in and the machine is set to F/T Mode, all phones on this
line will ring the number of times you selected in Ring Delay.
You can let the MFC pick up and detect if it’s a fax or voice call. If it’s a fax call,
the MFC prints the fax. If it’s a voice call, the MFC signals you with a double ring
for the length of time you selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the MFC continues for the
set time. If you don’t pick up during the ring time, the MFC begins sending a fax
tone, even if the caller is still on the line.