Registering the distinctive ringing phone number – Brother MFC 7000FC User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CM A F T E R . , ;

i t

: : : i : . <

, ; : ■ . : : ' - ■ ■ : ;

- î*v:

«T‘>‘v »•*-•>?

■•* » % * *

You can register only one Distinctive Ringing pattern with the MFC. Some ringing

patterns cannot be registered.

■

The MFC will answer only fax calls to its registered number.

■

To have your Message Center (or external TAD) answer only the main

number, the MFC must be in MANUAL Mode.

■

In F/T Mode or FAX Mode, the MFC will answer all numbers on the phone line.

Registering the Distinctive Ringing

phone number

H>- Disconnect the MFC from any TAD or telephone company voice mail. Set the

MFC to MANUAL mode.

H Have someone ready to call the Distinctive Ringing number

you’re assigning to the MFC.

;3 PressIFunctionl.m.in.fyi.

H Press (3 or [T] to select the SE'F Mode.

?5 Press®.

0 Press H. The screen displays

D/R SET MODE

ONLINE

Now, another person must call the Distinctive Ringing number.

If you want to exit this programming, press ®). Settings

remain unchanged.

When the MFC rings, listen for the ring pattern, and make sure it’s the one

for the new number for the MFC.

If it is, wait until the screen displays

PICK UP TO SET

ONLINE

0 Lift the MFC handset and press (^. The screen displays REGISTERED.

(If the incorrect Distinctive Ringing number was called, press H to

cancel.)

0 Hang up. The Distinctive Ringing feature is now on.

Once you’ve registered the Distinctive Ringing number in your MFC, you can turn

this feature ON or OFF without having to reset the number. To change the

setting, follow steps 1 to 4 above, selecting ON or OFF.