Before you begin, Connecting the mfc to your computer – Brother MFC 7000FC User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C H A P T E R T H R E E
Setting Up
theHti№ai
Comnuter to
Wor
and
Ipuier to
K Together
Before You Begin
"All software is supplied on CD-ROM. If you need a Floppy Diskette version, call Brother at 1-888-879-
3232
and order item # MFC7DSK. (Only MFL Pro, Visioneer PaperPort and 3D FaxSpeed are available
on Floppy Diskette.)"
^ Make sure the IEEE-1284 parallel interface cable is in the package.
Make sure to unplug the MFC power cord from the electrical outlet before
connecting the parallel interface cable.
3 Make sure your computer is off and unplugged from electrical power before
you connect the interface cable.
Connecting the MFC to Your Computer
Connect the interface cable to the parallel interface port on the back of the
MFC, and secure with the wire clips.
2 Connect the interface cable to the printer port of your computer, and secure
with the two screws. (To locate your computer’s printer port, see your
computer user guide.)
1
‘T------1--sr
I c-Oy ^