Brother MFC 7000FC - Manual (Page 31)

JL£LL
"U-i-
;0 Use the keypad and the chart on page 19 to enter a name for the group (for
example, NEW CLIENTS).
# Press (^.
Press M to exit.
You can print a list of all One Touch and Speed Dial numbers. See the Operations
Manual Chapter 2, "Printing Reports and Lists."
Setting Beeper Level
You can set the beeper to LOW, HIGH or OFF. The MFC comes set to LOW. When
the beeper is set to LOW or HIGH, the MFC beeps every time you press a key or
make an error, and at the end of fax sending or receiving.
Press [Functionl. m. ill. [T|.
^ Press 0 or (T| to select your setting.
^ When the screen displays the setting you want, press
H* Press W to exit.
Memory Storage____________________
All settings in the SET AUTO DIAL, USER OPTIONS, TEL OPTIONS, and SETUP
SYSTEM functions are stored permanently and will be retained even in the event
of a power failure.
Distinctive Ringing
This MFC feature lets you use the Distinctive Ringing subscriber service offered by
some telephone companies, which allows you to have several telephone numbers
on one phone line. Each phone number has its own Distinctive Ringing pattern,
so you know which phone number is ringing. This is one way you can have a
separate phone number for your MFC.
Your MFC has a Distinctive Ringing function, allowing you to dedicate one phone
number to receiving faxes. You’ll need to follow the directions below to “register”
the Distinctive Ringing pattern, so your MFC can recognize its incoming calls.
You will need another person standing by on another line to help you with Step 6
of this registration.
You can change or cancel the Distinctive Ringing pattern at any time. You can
switch it off temporarily, then turn it back on. When you get a new fax number,
make sure you reset this function.