Brother MFC 7000FC - Manual (Page 29)

: - ' \ o n S E T T 1 N ( i S
Enter the number (up to 20 digits).
Press 0. The screen now prompts you to store a name with this number.
n r m e :
S Use the keypad to enter the name (up to 15 characters). You can use the
chart on page 19 to help you enter letters—OR—Press 0 and go to Step 7
to store the number without a name.
:i^ Press®.
^ The screen prompts you to select the type of number this is. Use 0 or 0 to
select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone number
CHAIN a number (usually an access code) for chain dialing.
¡B‘ Press®.
0 Return to Step 2 to store another Speed Dial number—OR—Press ®g) to
exit.
Speed Dialing
^ Pick up the handset—OR—Press ISpeoker Phone |.
>2 When you hear a dial tone, press [Speed Diol|. then press the two-digit
Speed Dial number.
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either
1. CHANGE—OR—2. EXIT
Press (T) to change the number stored, or press [T] to exit without making a
change.
2 If you want to erase the number, press jClearj when the cursor is to the far left
of the digits.
3 If you want to change a digit, use (T) or 0 to position the cursor under the
digit you want to change, then enter it.