Brother MFC 7000FC - Manual (Page 27)

I N S T A L L A T I O N S E T T I N G S
Storing One Touch Dial Numbers________
You can store 24 fax/phone numbers that you can dial by pressing one key. You
can also store names with these numbers. When you press a One Touch dial
location, the screen displays the name or number as the call is dialed.
One Touch keys are not the dial pad keys. They are the 12 keys (number
01-24) located to the right of the dial pad. One Ibuch Numbers 13-24 are
accessed by holding doum the Shift button when you press the apporopriate
One Ibuch key.
Press (Functionl. m. in. m.
# Press the One Touch key where you want to store a number. (Key [T] is
pre-programmed for Brother Fax-Back System (USA only). You can override
it if you wish.) The screen displays the location you selected.
%■ Enter a number (up to 20 digits). If you want to enter a pause in the
dialing sequence (to wait for an “outside line,” for example), press
|Rediol/Pou$e| as you’re entering digits. Pressing iRedid/Pousel enters a 3.5-second
pause when the number is dialed, and a dash appears on the screen.
Press The screen prompts you to enter a name for this number.
NfiME:
5 Use the keypad to enter the name (up to 15 characters). You can use the
chart on page 19 to help you enter letters—OR—Go to Step 6 to store the
number without a name.
Press The screen prompts you to select the type of number this is. Use
0or(B to select the type you want.
FAX a fax only number
TEL a telephone (voice) number
F/T both a fax and telephone (voice) number
CHAIN a number (usually an access code) for chain dialing.
P- Press W.
# Return to Step 2 to store another One-Touch number—OR—Press to
exit.
When you dial an AUTO DIAL number, the screen displays the name you’ve
stored, or, if you haven’t stored a name, the number you’ve stored.
If you need to store a pause longer than 3.5 seconds, please call Brother Customer
Service at 1-800-284-4329 in the USA, or 1-800-853-6660 from within Canada.