beautypg.com

Kenmore 385.15408 User Manual

Page 62

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Troubleshooting

Condition

Cause

Reference

^

The needle thread

breaks.

1. The needle thread is not threaded properly.

2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted. :
5. The needle thread and the bobbin thread are not set properly :

under the presser foot at the beginning of sewing. :

6. The threads are not drawn to the rear after previous sewing. ■
7. The thread is too heavy or too fine for the needle. : - ; r

Page 24
Pages 26, 28
Page 10

Page 10

■yPages 22, 24, 26

Page 32

/Page 14

The bobbin thread

breaks.

1. The bobbin thread is not threaded prppériy in thé bobbin ; : : ; : y

case and shuttle. ' ^ ^

2. Lint has collected in the shuttle area.; ;i . : ^ ^
3. The bobbin is damaged and ydbesn't turn smoothly.

Page 22

Page 60

Change the bobbin

The needle breaks.

1. The needle is incorrectly inserted. : ry; : ; y yy

2. The needle is bent or blunt, : ■ : y: . y : : y : y y ■
3. The needle clarnpyscrewyis loose, i y y y y y : y y y : y: y
4. The needle thread tehsion; is too tight: y: y : ; ; ^ ^ ^
5. The threads are not drawn to the rear after the previous sewing.
6. The needle is too fine for the fabric being sewn.- :

Page 10
Page i O
Page 10
Pages 26, 28
Page 32
Page 14

Skipped stitches

: i, yThe needle ¡s incorrectly inserted. : : i:
: 2. The needle is bent or blunt.

3. The needle and/or threads are not suitable for the work being

sewn. •

4. A blue needle is not being used for sewing stretch, very fine

fabrics or synthetics.

5. The needle thread is not threaded properly.

16. Thé wrong needle is being used.

Page 10
Page 10
Page 14

Page 14

Page 24
Change the needle

Seam puckering

1. The needle thread tension is too tight.

2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.

Pages 26, 28
Page 24
Page 14
Make stitch shorter

The cloth is not
feeding smoothly.

1. The feed dog is packed with lint.

2. The stitches are too fine.
3. The feed dog is not raised after “drop feed” sewing.

Page 58
Make stitch longer
Page 38

The machine
doesn’t work.

1. The machine is not plugged in.

2. A thread is caught in the shuttle race.
3. The push-clutch is disengaged.

Page 6
Page 60
Pages 18, 20

Noisy operation

V_____________________

1. There is thread caught in the hook race.

2. Lint has built up in the shuttle or the shuttle race.

Page 60
Page 60

__________________ )

For customer assistance call or e-mail:

1-877-SEWING-U (1-877-739-4648)

9 am - 4:30 pm, CST, Monday - Friday

[email protected]

64

This manual is related to the following products: