Important safety instructions, Danger, Save these instructions – Kenmore 385.15408 User Manual
Page 2: Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IMPORTANT SAFETY
INSTRUCTIONS
When
using an electrical appliance, basic
safety
precautions should always be followed, including
the
following:
Read all instructions before using this appliance.
DANGER
— To
reduce
the risk of
electric
shock;
1. An
appliance
should never be
left unattended
when plugged in.
Always
unplug this sewing machine from the electric
outlet immediately after using and before cleaning.
■ : ' : y ■'
.
2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated .
■
15Watts.
,
\
■
WARNING
— To reduce the
risk of burns,
fire, electric shock
or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children,
2. Use this appliance only for its intended use as described in this owner’s manual. Use only attachments recom
mended by the manufacturer as containediin this owner’s.manual.
. ..
3. Never operate this sewing machine if.it ha.s a damaged cord or plug, if it .is .not working properly, if it has been
dropped
or
damaged,
or
dropped into water.
;
■ ..
Return this sewing machine to the nearest Sears store or service center for examination, repair, electrical or me
chanical adjustment, f '
.
■
4.
Never operate the appliance
with
any
air
opening
blocked
Keep
ventilation
openings
of this sewing machine and foot
controller free
from
accumulation of lint, dust
and loose
cloth.
5. Never drop or insert any object into any opening.
6.
Do not use
outdoors...
..' ...
i
7.
Do not operate where aerosol (spray) products are
being
used or where oxygen is being
administered,
8. To disconnect, turn all controls to the off (“O") position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers
away
from all moving
parts.
Special care is required around the sewing machine needle.
1
1
. Always
use
the proper
needle
plate. The wrong plate can
cause
the
needle
to break.
12. Do not use bent needles.
1
3.
Do not pull or push fabric
while stitching. It
may
deflect
the
needle
causing
it
to break.
14.
Switch this sewing machine off
(“O”) when making
any
adjustment in the needle area, such as
threading
the needle,
changing the needle, threading the bobbin, changing the presser foot, and the like.
1
5.
Always
unplug
this sewing machine
from the
electrical outlet when removing covers, lubricating, or when
making
any
other
adjustments mentioned in this
owner’s
manual.
SAVE THESE INSTRUCTIONS
NOTE:
Sewing machine design
and specifications are
subject to
change
without
prior notice.