Kenmore 385.15408 - Manual (Page 34)

• Inserting bobbin
ni Place a bobbin in the bobbin case, making sure the
thread feeds clockwise from the bobbin.
[ 2 ] Draw the thread through the slot of the case.
m
] Continue to draw the thread under the tension spring (T)
and through the opening. : i ’ ■ i t
Pull out about 4” (10 cm) of thread. :
® Tension spring ■
] Holding the latch (2) open, insert the bobbin case into
the shuttle so that the bobbin case prong (3) fits into the
shuttle slot (?)•
@ Latch
(3) Bobbin case prong
@ Shuttle slot
] Release latch. Bobbin case will lock into place.
22