beautypg.com

Bobbin winding, Bobbin winding -22 – Kenmore 385.15408 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Bobbin Winding

• Removing bobbin case

Remove the extension table from the machine by pulling
it to the left. Open the shuttie cover©by pulling down

the embossed part on the left of the cover.

Raise the needle to its highest position by rotating the
handwheel toward you.

© Shuttle cover
© Bobbin case

To remove the bobbin case ©from the shuttle, pull open
the latch of the bobbin case. Pull the bobbin case straight
out of the shuttle.

• Bobbin winding

: ^

^ ^

© Release the clutch by puliing out the handwheel. This

will stop the neeclleifrom moving while you wind the

bobbin,

m

©

© Draw thread from the spool.
©Guide the thread around the thread guide.
©Thread through the hoie in the bobbin from the inside to

the outside.

© Put the bobbin on the bobbin winder spindle.

18

This manual is related to the following products: