Stitch width control, How to adjust the stitch width), Stitch length control – Kenmore 385.162213 User Manual

Page 46: How to adjust the stitch length), Stitch length zones stitch width control, How to adjust buttonhole stitch density

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

stitch Width Control
(how to adjust the stitch width)

Slide the stitch width control to the desired stitch width

number

The higher the number, the greater the stitch width, The

mark shows the adjustment range when using the twin

needle. The blue zone is the appropriate adjustment range

for buttonhole sewing.

* Before sliding the stitch width control, be sure to raise the

needle above the fabric.,

(T) Stitch width control

Stitch Length Control
{how to adjust the stitch length)

Slide the stitch length control to the desired stitch length

number.
Set the stitch length control at S„S. when using a stretch

stitch. The higher the number, the greater the stitch length,.
The

EZZi

mark shows the adjustment range when sewing the

buttonhole.

* Raise the presser foot before sliding the stitch length

control,

® Stitch length control