Bobbin winding, Bobbin winding -24 – Kenmore 385.162213 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bobbin Winding
»Horizontal spool pin
0 Spool pin
@
Large spool holder
(3) Small spool holder
Lift up the spool pin 0 Place a spool of thread on the
spool pin with the thread coming off the spool as shown-
Attach the large spool holder and press it firmly
against the spool of thread,
The small spool holder (3) is used with narrow or small
spools of thread.
' Additional spool pin
0
Additional spool pin
@ Spool pin hole
@ Spool pin felt
The additional spool pin 0 is for bobbin winding, without
unthreading the machine, and for twin needle sewing,
insert the additional spool pin0 into the hole0.
Place the felt@and a spool on the pin.
20