Kenmore 385.162213 - Manual (Page 106)

0] Unplug the machine and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver. Remove the needle
piateCl) and take out the bobbin.
(1) Needle plate
Cleaning the Shuttle Race and Feed Dogs
] Lift up the bobbin holder® and remove it.
(2) Bobbin holder
I Brush out dust and lint inside the bobbin holder. Clean
the feed dogsCDand hook race@with a lint brush. Wipe
out gently with a soft, dry cloth.
(3) Feed dogs
0 Hook race
jT| Line up the triangle marks® and position the bobbin
holder, so that the notch fits next to the stopper® in the
hook race.
® Line up the triangle marks.
® The notch fits next to the stopper.
Oiling the iVIachine
Unplug the machine. Open the face cover and oil the two
points, as shown, at least once a year One or two drops of
oil is sufficient. Remove excess oil, otherwise it may slain the
fabric. In case the machine has not been used for a tong
period, oil it before sewing. Use quality sewing machine oil,