ALTANA Cupping Tester - Manual (Page 25)

2.1 Set-up
The electrohydraulic cupping tester,
model 5400, is shipped ready for
connection and including the basic
oil fi ll.
Screw the handle in one of the 3
inside threads of the eccentric
clamping ring.
2.2 Connection to the
Mains
Supply
The electrohydraulic cupping tester
has an automatic power supply
detection. Connect the power cord to
the machine and plug the power plug
into a shockproof socket.
2.0 Preparations
Remove the packing Transport with 2 persons