ALTANA Byko-Test MP0R - Manual (Page 7)

7
3 Measurements on coating material
Making measurements with the MP0R:
1. With the instrument switched ON, place the instrument on the specimen and wait, until the acoustic signal
sounds. The instrument will switch ON automatically this way.
2. Lift the instrument off the specimen.
The acoustic signal sounds and the reading will be displayed. Note: when lifting the instrument too early
(before the beep sound), the error note "Er6" will appear. In this case, repeat step #1.
The measurement is transmitted automatically to the radio receiver (cf. chapter 13 “Service Menus”, page 26,
menu 3, “radio transmission ON/OFF”. The transmission is indicated by the flashing radio tower symbol.
3. When measuring with an instrument which is already swiched ON, a reading will be displayed at once.
As well as with an instrument placed on the specimen and with the instrument lifted off.