ALTANA Byko-Test MP0R - Manual (Page 12)

12
5.2 Transmitting all measurement data in the instrument memory
1. Set the display menu with [] or [] to show .
2. Press button [OK].
All readings in the memory are then radioed to the PC. This is indicated by the flashing radio tower symbol.
5.3 Sending the current mean value
Prerequisite for following sub-chapters of 5.3:
Settings of service menu must be “SI = 0” e.g. mean value transmission is active. See chapter 13 “Service menu,
menu #4”, menu mean value transmission”.