ALTANA Byko-Test MP0R - Manual (Page 11)

11
5 Transmitting data to a computer
The RS232 radio interface integrated in the instrument facilitates the transmission of the data stored in the
measurement data memory to an optional radio receiver (order no. of US-receiver version: 603-544).
The radio receiver, in turn, transmits the data to the evaluation computer via a cable. There is a separate
operator's manual for the optional radio receiver.
Prerequisite for all following sub-chapters: Settings of service menu must be “rF = 1” e.g. the radio transmitter
is active. See chapter 13 “Service menu”, menu #3”, radio transmission, page 26.
5.1 Transmitting only the current reading
Independent of the current menu selection, each reading is radioed to the computer automatically.
At the same time, the reading is accepted into the measurement data memory of the instrument and can be
evaluated statistically.