ALTANA Byko-Test MP0R - Manual (Page 27)

27
Service menu 1
Menu point
Default setting Further settings
Lock function for
or
CE I =
locked free
CE 0 =
locked locked
CE 2 =
free free
Block length bL1 2 ... 20
Note: "0" has the same function like "1".
Display resolution dI 0 = low resolution 1 = medium resolution
2 = high resolution
Block length: Block length determines, how many single readings are collected to a block. If block formation and
the RES mode are active, the mean value of the block is displayed automatically after the determined number of
single readings (“block formation”: this is the case, when the block length number is higher than 1).
Display resolution: this is to determine the number of numerals after the decimal point in the display.