A&D Weighing HR-202i - Manual (Page 59)

57
Other accessories
Order code Name and description
AD-1682
Rechargeable Battery
This option allows use of the balance in a place where AC power is
not available.
AD-1684
Electrostatic field meter
This option measures the amount of the static charge on the
sample, tare or peripheral equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683
DC static eliminator.
AD-1685
Anti-vibration table
This option can be used when the balance has difficulty stabilizing,
due to vibration coming from the floor.
As the table has a high vibration absorbing property, key operations
on the balance may make the top of the table tilt slightly, causing a
weighing error. To avoid this, use the AD-8922 remote controller to
control the balance.
AD-1689
Tweezers for calibration weight
This option is used when calibrating the balance using an external
weight.
AD-8526
LAN Converter
This option can be used to connect the RS-232C interface of the
balance to the Ethernet (LAN) port of a computer. This allows
management of the balance weighing data with a computer
connected to a network.
AD-8920
Remote Display
This option can be connected to the balance using the RS-232C
interface.
AD-8922
Remote Controller
This option can be connected to the balance using the RS-232C
interface and can control the balance remotely.
Various options such as comparator output or analog output are
available.