Unit setting example – A&D Weighing HR-202i User Manual
Page 15
13
5.2.1.
Unit setting example
The example below sets the units in the order with g (gram) as the first unit followed by pcs
(counting mode).
1 Press and hold the
RANGE
key until
ba5fnc
of the
function table is displayed in the weighing mode, then
release the key.
2 Press
the
RANGE
key several times to display
Unit
.
3 Press
the
key to enter the unit selection mode.
4 Press
the
RE-ZERO
key to specify the unit of g.
The stabilization indicator
appears when the
unit is specified.
5 Press
the
RANGE
key several times to display
.
6 Press
the
RE-ZERO
key to specify the unit of pcs.
The stabilization indicator
appears when the
unit is specified.
7 Press
the
key to store the units.
The balance displays
end
and then displays the next
menu item of the function table.
8 Press
the
CAL
key to exit the function table. Then
the balance returns to the weighing mode with g, the
unit selected first.
9 Press
the
MODE
key to switch between g and pcs
(g
→pcs).
Press and hold
Press
several times
Press
several times
Specify
Store
Specify