A&D Weighing HR-202i - Manual (Page 21)

19
7. Response Adjustment
This function adjusts the response of the balance and reduces the influence of drafts and/or
vibration at the place where the balance is installed. The function has three stages as
follows :
Indicator Parameter Response Stability
FAST Cond 0
MID. Cond 1
SLOW Cond 2
Fast response, Sensitive value
Slow response, Stable value
1 Press and hold the MODE key until RESPONSE is
displayed, then release the key.
Press the
MODE key again quickly.
2 Select a stage of the response adjustment using
the MODE key. Either FAST , MID. or SLOW
can be selected.
3 The balance automatically returns to the weighing
mode and displays the updated response indicator
for about thirty seconds.
Advise
If the automatic response adjustment is not helpful, specify a parameter for "Condition ( Cond ) "
of "Environment, Display ( ba5fnc )" with key operation.
.
Response
indicator
Release and wait
Press and hold
Release
Press again
immediately
Select a parameter