A&D Weighing HR-202i - Manual (Page 38)

36
11. ID Number and GLP Report
The ID number is used to identify the balance when Good Laboratory Practice (GLP) is used.
The ID number is maintained in non-volatile memory even if the AC adapter is removed.
The GLP output format is selected at "GLP output (
info )" of the function table and can be
output to a personal computer or printer using the RS-232C serial interface.
The GLP output format includes the balance manufacturer, model, serial number, ID
number, date column, time column and a space for signature for the weighing data, the
weight used and results for calibration or calibration test data. When connecting the
AD-8121B printer, the date and time can be printed using the clock function of the
AD-8121B.
The balance can output the following reports for GLP.
"Calibration report" of the calibration, using an external weight.
"Calibration test report" of the calibration test, using an external weight.
"Title block" and "End block" for the weighing data.
11.1. Setting the ID Number
1 Press and hold the RANGE key until ba5fnc of the function table is displayed, then
release the key.
2 Press
the RANGE key several times to display id .
3 Press
the PRINT key. Set the ID number using the following keys.
RE-ZERO key..... The key to set the character of the digit selected.
Refer to the display character set shown below.
RANGE key........ The key to select the digit to change the value.
PRINT key ......... The key to store the new ID number and display ba5fnc .
CAL key............. The key to cancel the new ID number and display ba5fnc .
4 With
ba5fnc displayed, press the CAL key to return to the weighing mode.