Setting procedure – A&D Weighing HR-202i User Manual

Page 28

Setting procedure

1 Press and hold the

RANGE

key until

ba5fnc

of the function table is displayed in the

weighing mode, then release the key

2 Press

the

RANGE

key to select a class.

3 Press

the

key to enter the class

4 Press

the

RANGE

key to select an item.

5 Press

the

RE-ZERO

key to select a parameter for the selected item.

6 If storing parameters of the selected class, press the

key.

Then the next class is displayed.
If canceling the current operation, press the

CAL

key. Then the next class is displayed.

7 When specifying parameters for another class, proceed to step 2.

When finishing the setting, press the

CAL

key to return to the weighing mode.

This manual is related to the following products: