Error code – A&D Weighing HR-202i User Manual
Page 49
47
Error code
This example is of an error using the R command. "
erCd 1
" is used. The balance transmits
an error code when the received command can not be achieved.
Computer Time
Balance
R command
CAL command
Weighing mode (unstable)
Command received
In process
When the R command can not be
achieved due to unstable weighing:
Error code
When the CAL command is
received, the balance returns to the
weighing mode
Command completed
Weighing mode
This manual is related to the following products: