Cabletron Systems SmartSTACK ELS100 User Manual
Page 90
76 Technical Specifications
ELS100-24TX
Table A-1. Power Cord Set Requirements by Country
Note 1
Flexible cord must be
HO5VV-F or HO3VV-F, 3-conductor,
1.0 mm
2
, or 0.75 mm
2
conductor size. Power cord set fittings (appliance
coupler and wall plug) must bear the certification mark of the agency
responsible for evaluation in the country where it will be used.
Note 2
Flexible cord must be Type SV, SJ, SPT or equivalent, No. 18 AWG,
3-conductor. Wall plug must be a two-pole grounding type with a NEMA
5-15P (15A, 125V) or NEMA 6-15P (15A 250V) configuration.
Note 3
Appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law.
Flexible cord must be Type VCT or VCTF, 3-conductor, 0.75mm
2
conductor size. Wall plug must be a two-pole grounding type with a
Japanese Industrial Standard C8303 (15A, 125V) configuration.
Country
Accredited Agency
See Notes *
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
JIS
3
Netherlands
KEMA
1
Norway
NEMKO
1
Sweden
SEMKO
1
Switzerland
SEV
1
United Kingdom
BSI
1
United States
UL
2
The note column includes a number. Associate this number
with the corresponding notes listed after the table to obtain
specific power standards and requirements.