Cabletron Systems SmartSTACK ELS100 - Manual (Page 47)

9032579-03 ELS100-24TX User Interface 33
Spanning Tree Port Configuration Menu
The Spanning Tree Port Configuration Menu allows you to view Spanning
Tree Configuration information for all of the ports in a table format. Select
b from the Spanning Tree Configuration Menu to view the Spanning Tree
Port Configuration Menu. Figure 3-9 shows the Spanning Tree Port
Configuration Menu and the accompanying table describes the Spanning
Tree Port Configuration Menu.
Figure 3-9. Spanning Tree Port Configuration Menu
SPANNING TREE PORT CONFIGURATION Access Control: READ/WRITE
PORT ID PORT NAME PATH COST PORT PRIORITY PORT STATE
---------------------------------------------------------------------------------------------------------
1 10 128 FORWARDING
2 10 128 FORWARDING
3 10 128 FORWARDING
4 10 128 FORWARDING
5 10 128 FORWARDING
6 10 128 FORWARDING
7 10 128 FORWARDING
8 10 128 FORWARDING
9 10 128 FORWARDING
10 10 128 FORWARDING
n. Next Page p. Previous Page f. First Page l. Last Page
a. Select Port r. Refresh x. Previous Menu
Enter Selection:
Field Description
Port ID A unique identifier for a port on the bridge (switch).
Port Name The administrative name assigned to the port.
Path Cost The contribution of the path through this port, when it is the root port,
to the total path cost from this bridge to the root bridge. 10 for 100Mbps
ports, 100 for 10Mbps ports.
Port Priority The relative priority of the port on the bridge.
Port State The current Spanning Tree state of the port on the bridge, either
disabled, listening, learning, forwarding, or blocking.
Selection Description
Next Page Displays the next page of the table.
Previous Page Displays the previous page of the table.
First Page Displays the first page (top) of the table.
Last Page Displays the last page of the table.
Select Port Allows you to enter a port number to view and modify port parameters
in the Spanning Tree Port #n Configuration Menu.