Cabletron Systems SmartSTACK ELS100 - Manual (Page 48)

34 ELS100-24TX User Interface ELS100-24TX
Spanning Tree Port #n Configuration Menu
The Spanning Tree Port #n Configuration Menu allows you to view
Spanning Tree Port Configuration information for an individual port.
Select a from the Spanning Tree Port Configuration Menu to view the
Spanning Tree Port #
n Configuration Menu. Figure 3-10 shows the
Spanning Tree Port # n Configuration Menu and the accompanying table
describes the Spanning Tree Port # n Configuration Menu. The “Port #n”
designation represents the specific port number for configuration.
Figure 3-10. Spanning Tree Port Configuration Menu
SPANNING TREE PORT #1 CONFIGURATION Access Control: READ/WRITE
Port State DISABLED
MAC Address 0a0a0a0a0a0a
Designated Cost 0
Designated Port 0
Designated Root
Designated Bridge
a. Path Cost 10
b. Port Priority 32768
x. Previous Menu
Enter Selection:
Field Description
Port State The current Spanning Tree state of the port, either disabled,
listening, learning, forwarding, or blocking.
MAC Address The MAC address of the port.
Designated Cost The cost of the path to the Root offered by the designated
port for the LAN associated with the port.
Designated Port The Port ID of the port believed to be the designated port for
the LAN associated with the port.
Designated Root The Bridge ID of the bridge recorded as the Root for the LAN
associated with the port.
Designated Bridge The Bridge ID of the bridge believed to be the designated
bridge for the LAN associated with the port.
Selection Description
Path Cost The contribution of the path through this port, when it is the
root port, to the total path cost from this bridge to the root
bridge (1-65535 range).
Port Priority The relative priority of the port on the bridge (0-255 range).