Cabletron Systems SmartSTACK ELS100 - Manual (Page 37)

9032579-03 ELS100-24TX User Interface 23
Factory Defaults
Table 3-1 lists the factory default settings for the switch configuration
parameters. Each of these parameters can be changed via the console
menus or Telnet.
Table 3-1. Factory Default Settings
Parameter Default Value
Active Aging Time 300
Auto-negotiation Enable Yes
Broadcast Cutoff Rate 500000
BootP/DHCP Enable Yes
Bridge Priority 32768
Class of Service Enable No
Class of Service Port Priority 0
Class of Service Priority Thresh-
old 4
Flow Control Enable No
Forward Delay 15
Full Duplex Yes
Hello Time 2
Max Age 20
Password
Path Cost 10 for 100Mbps speed ports
100 for 10Mbps speed ports
Port Enable Yes
Port Priority 128
Port Speed 100
Port Mirroring Enable No
Screen Timeout 0
SNMP Private Community Name private
SNMP Public Community Name public
Spanning Tree Protocol Enable Yes
Terminal Baud Rate 9600
Terminal Hardware Flow Control No
VLAN Enable No
VLAN Port Type Access