KEYENCE LS-9030D - Manual (Page 3)

E LS-9006D/LS-9030D 3
Using the Display Panel Support
The following describes how to mount the display panel support (OP-87757)
to the casing.
Common to LS-9006D/LS-9030D
1
Mount the display panel support to the display panel (LS-D1000) using
the provided bolts (M4 x L10).
Maximum tightening torque for securing the unit: 0.75 N m
2
Mount the display panel support to the casing using the provided
bolts (M5 x L12).
The panel support can be mounted on either side of the casing.
Specifications
*1 A ± 2 σ margin of error when measuring the outer diameter of φ 1.0 mm round
bars in the center of the measurement area with the average measurement
number set as 2048 times.
*2 A ± 2 σ margin of error when measuring the outer diameter of φ 10 mm round
bars in the center of the measurement area with the average measurement
number set as 2048 times.
*3 Margin of error when a moving φ 1.0 mm round bar is measured in the
measurement area.
*4 Margin of error when a moving φ 10 mm round bar is measured in the
measurement area.
*5 The sampling frequency will vary according to the number of OUTs that have
been set and the use of the mutual interference prevention function.
z Air purge unit
z Target holder pulley
z Display panel support
Model LS-9006D LS-9030D
Measurement target φ 0.04 mm φ 6 mm φ 0.3 mm φ 30 mm
Minimum object sensitivity 0.04 mm 0.3 mm
Repeatability ±0.03 μ m* 1 ±0.1 μ m* 2
Measurement position
accuracy
±0.5 μ m* 3 ±2 μ m* 4
Sampling frequency* 5 16000 times/sec
Light source InGaN green LED
Monitor function Unavailable
Environment
resistance
Operating
ambient
temperature
0 to + 50ºC
Operating
ambient
humidity
20 to 85% RH
(No condensation)
Ambient
luminance
Incandescent lamp/Fluorescent lamp:
3000 lx or less
Vibration
resistance
10 to 55 Hz, double amplitude 1.5 mm;
2 hrs in X, Y and Z directions
Impact
resistance
15 G/6 ms
Sensor head protection
structure
IP67 (including the connector part)
Material Aluminum
Weight Approx. 4.8 kg Approx. 9 kg
Model OP-87751 OP-87752
Material Aluminum
Weight Approx. 1500 g Approx. 400 g
Model OP-87749 OP-87750
Material Aluminum (Main unit), SUS (Pulley part)
Weight Approx. 300 g
Model OP-87757
No. of mountable display panels 1
Material Steel
Weight Approx. 250