3. window mode, Operation, Setting – KEYENCE LR-TB2000 Series User Manual
Page 5: Completion
5
z
Full auto calibration
Use this function when the movement of detected objects cannot be stopped.
z
1-point calibration
Use this function to enable the installation of detected objects at the upper limit that you
do not want to detect.
4-3. Window Mode
Operation
• In this mode, the distance from the sensor is displayed.
• You can assign setting values to the upper and lower limits.
Setting
• Set the detection mode to [Window].
"6 Detailed Settings" (page 8)
• For details on setting output 2, see
" 4-5. Switching Out1/Out2" (page 6).
z
2-point calibration
Use this function to detect objects inside a range of specific upper and lower limits.
1567
1234
XX-XXXX
DISP
MODE
1
2
1
2
1567
1234
XX-XXXX
DISP
MODE
1
2
1567
1234
XX-XXXX
DISP
MODE
1
2
N.O.
N.C.
ON
OFF
ON
OFF
Press and hold the set button
for 3 seconds or more.
Completion
Press and hold the set button
for 3 seconds or more.
The object is detected while
the button is pressed.
1
1567
1234
XX-XXXX
DISP
MODE
1
2
N.O.
N.C.
1567
1234
XX-XXXX
DISP
MODE
1
2
ON
OFF
ON
OFF
Press and hold the set button
for 3 seconds or more.
Completion
1567
1234
XX-XXXX
DISP
MODE
1
2
Hys.
Hys.
ON
ON
0
2000
N.O.
N.C.
OFF
OFF
NEAR
FAR
Hys: Hysteresis (
1567
1234
XX-XXXX
DISP
MODE
1
2
1
2
1567
1234
XX-XXXX
DISP
MODE
1
2
1567
1234
XX-XXXX
DISP
MODE
1
2
ON
NEAR
FAR
ON
N.O.
N.C.
OFF
OFF
Completion
Press the set button for 1 second or less.
Press the set button for 1 second or less.