Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 57)

EN-55 5000 Series Indicators
8. TECHNICAL DATA
8.1 Specifications
Materials
T51XW Housing: stainless-steel
T51P Housing: ABS plastic
Display window: polycarbonate
Keypad: polyester
Feet: Rubber
Ambient conditions
The technical data is valid under the following ambient conditions:
Ambient temperature: -10°C to 40°C / 14°F to 104°F
Relative humidity: Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50%
relative humidity at 40°C.
Height above sea level: up to 2000m
Operability is assured at ambient temperatures between -10°C and 40°C.
Indicator T51P T51XW
Maximum Displayed Resolution 1:30,000
Maximum Approved Resolution 1:10,000
Maximum Counting Resolution 1:300,000
Weighing Units kg, lb, g, oz, lb:oz, tonnes, custom
Functions Static Weighing, Dynamic Weighing, Counting, Checkweighing, Percent Weighing
Display 25 mm / 1 in High 6-digit, 7-segment LCD
Over/Accept/Under Indicators Red, Green, Yellow LED
Backlight White LED
Keypad 4-button membrane switch
Ingress Protection --- IP66
Load Cell Excitation Voltage 5V DC
Load Cell Drive Up to 8 x 350 ohm Load Cells
Load Cell Input Sensitivity Up to 3 mV/V
Stabilization Time Within 2 Seconds
Auto-zero Tracking Off, 0.5, 1 or 3 Divisions
Zeroing Range 2% or 100% of Capacity
Span Calibration 1 kg or 1 lb to 100% Capacity
Housing Dimensions (W x D x H)
(mm/in)
260 x 71 X 168 / 10.2 x 2.7 x 6.6 262 x 76 x 149 / 10.3 x 3.0 x 5.8
Net Weight (kg/lb) 1.5 / 3.3 3.5 / 7.7
Shipping Weight (kg/lb) 2.3 / 5 4.3 / 9.5
Operating Temperature Range -10°C to 40°C/14°F to 104°F
Power
100-240 VAC / 50-60 Hz Internal Universal Power Supply,
6 C-type batteries (T51P)
Interface Built-in RS232 and External Input
TABLE 8-1. SPECIFICATIONS