Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 36)

EN-34 5000 Series Indicators
Project ID
Set the status.
OFF = Disabled.
ON = the Project ID is printed.
Scale ID
Set the status.
OFF = Disabled.
ON
= the Scale ID is printed.
Reference Information
Set the status.
OFF = Disabled.
ON
= the Reference Information is printed.
NOTE: The Reference Information is dependent on the active mode (Weigh mode: None, Count mode: APW,
Percent mode: Reference Weight, Dynamic mode: Level, Check Weigh mode: Under and Over limits).
Time
Set the status.
OFF = Disabled.
ON = the Date and Time is printed.
Difference
Set the status.
OFF = Disabled.
ON = the Calibration Test difference is printed.
Mode
Set the status.
OFF = Disabled.
ON
= the Mode is printed.
Name
Set the status.
OFF
= Disabled.
ON = the Name line is printed.