Holtgreven Ohaus Defender Series Bench Scales User Manual
Page 28

EN-26
5000 Series Indicators
3.6.2 Weighing Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.3 Parts Counting Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.4 Parts Counting Optimize
Set the status.
OFF = Disabled
ON
= Enabled
3.6.5 Percent Weighing Mode
Set the status.
OFF = Disabled
ON
= Enabled
3.6.6 Dynamic Weighing Mode
Set the status.
OFF = Disabled
MAN = averaging and resetting are initiated manually by pressing the FUNCTION button.
SEMI = averaging is automatically initiated when the load is greater than 5 divisions;
resetting is manually initiated by pressing the FUNCTION button.
AUtO = averaging is automatically initiated when the load is greater than 5 divisions;
resetting is automatically initiated when the load is less than 5 divisions.
If MAN, SEMI or AUtO is selected, the current level setting is displayed.
Set the averaging time.
SEt 0 = the first stable weight will be held on the display until it is reset (display hold).
SEt 1 = the weight readings will be averaged for 1 second. The average will be held on the
display until it is reset.
SEt 60 = the weight readings will be averaged for 60 seconds. The average will be held on
the display until it is reset.
3.6.1 Reset
Set the Mode menu to the factory defaults.
NO
= not reset.
YES = reset.
NOTE: If the Legal for trade menu item is set ON, the settings are not reset.