Hardy HI 1769-FC - Manual (Page 16)

11
●
●
●
●
●
Chapter 3
Installing the HI 1769-FC on a DIN rail
Step 1: Pull the two DIN rail fasteners out until the snap into the open position.
Rail fasteners in retracted position
Step 2: Place the module on the DIN rail.
Step 3: While holding the module in place, press the two fasteners towards the center of
the module until they both snap onto place.
Rail fasteners in closed position
Step 4: The module is now securely fastened to the DIN rail
Step 5: To remove the module from the DIN rail reverse steps 2 & 3 above.