Applying decals – Hangar 9 3.1m Sukhoi SU-26MM ARF (3 Boxes) User Manual
Page 34
34
Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual
Applying decals
Kit comes with decal sets and all decals are die-cut. All large decals should be applied wet so the bubbles can be worked out by squeegee. Allow 24 hours for decals to dry and adhesive to
set.
It is important to take all the wrinkles in the covering out and would be best to apply the decals after the plane has been taken to a flying field a couple of times and all the wrinkles have
been removed. The following pictures show the location of decals.
Wing Decal Close-up