Hangar 9 3.1m Sukhoi SU-26MM ARF (3 Boxes) - Manual (Page 25)

25 Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual
 4. Use cutting disk, drum sander and a rotary tool to
cut the cowl. Holes need to be at least 1/4 inch larger than
muffler stack diameter.
Fuel Tank, Fill and Over Flow
Installation
Required Parts
Fuselage Fuel tank
Required Parts (not included)
Hangar 9 Fuel filler and T
Required Tools and Adhesives
Drill and bits (1/16-inch, 1/8-inch)
Zip tie
Hemostat
Double-sided tape or adhesive-backed hook and loop
Medium CA
Hook and loop staps
Rotary tool Sanding Drum (3/8-inch)
 1. Fuel tank comes assembled but not installed. It is
recommended that lines be checked every 2–3 months and
replace them if they have hardened.
 2. Fill line is installed at the front left side of the
fuselage using Hangar 9 fuel filler. Drill a small hole; then
using a rotary tool and 3/8-inch diameter sanding drum
or grinding bit, open the side of the fuselage for the fuel
filler.
 3. Tank fill line goes to a T. Use the straight path outlet
to connect to carb and other to fuel filler. Wrap safety wires
around the lines.