Hangar 9 3.1m Sukhoi SU-26MM ARF (3 Boxes) - Manual (Page 27)

27 Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual
 11. To help prevent the line from going back inside the
cowl, open up the fuel line with use of hemostat and pull
over the overflow line.
Ignition Module, battery, Regulator
and Switch Installation
Required Parts
Fuselage
Required Parts (not included)
JR 5203 regulator Ignition Module
Ignition Battery, 2000 2-cell Spektrum
JR heavy-duty switch or similar
JR heavy-duty 6-inch extension
Required Tools and Adhesives
Hobby knife Iron
Masking tape Medium CA
Hook and loop Double-sided tape
 1. Locate the ignition switch cut out in the right front of
the fuselage and remove the covering. Mount the ignition
switch.
 2. Locate the slots for the ignition module behind the
cowl mounting ring and remove the covering.
 3. Iron down the edges and the covering on the engine
box.
 4. The ignition module and battery will be installed as one
piece, on top of each other. Apply masking tape to both sides
of battery and bottom side of ignition module.