Hangar 9 3.1m Sukhoi SU-26MM ARF (3 Boxes) - Manual (Page 17)

17 Hangar 9 3.1m Sukhoi SU-26MM ARF Assembly Manual
angle slightly swept forward.
 8. Tail gear is mounted using (3) 4-40 ½ inch screws and
3 washers included in the kit.
 9. Mount the T-bracket and mark the holes.
 10. Drill a pilot hole using a pin vise, then mount the
screws and remove them.
 11. Apply thin CA in the holes and wait until it is dry, this
will harden the wall.
 12. Mount the T-bracket using small wood screws and
the tail gear using washers and screws; make sure to use
threadlock on the bolts. Hook the springs from the tiller arm
to the T-bracket and secure them.