beautypg.com

Application example – Doepfer DIY Synth do-it-yourself analog synthesizer User Manual

Page 18

background image

DIY Synth Kit

Page 18

User's Guide

Application Example

These symbols for electronic parts are used in the following:

The picture on the next page shows the complete schematics (including all controls, sockets,
switches and LEDs) for a typical application of the DIY Synthesizer board. On the pages
following the diagram the wiring is described in detail.

Resistor

equivalent
US symbol

Potentiometer

equivalent
US symbol

Socket (any type, e.g. 3.5 mm miniature jack
socket, 1/4" jack socket, banana socket

Socket with switching
contact for signal normalling

Toggle switch 1-0-1 with
center position

Diode or LED

GND connection

Positive voltage terminal
(e.g. +12V or +5V)

Negative voltage terminal
(e.g. -12V or -5V)