How to use this manual – Cub Cadet 310-3000 User Manual
Page 16
12
310-3000 IHT
Miscellaneous
310-3000 Service & Repair Manual
Loctite
Flat Blade Screw Driver
Torque Wrench
Air Impact Wrench
Pliers
Needle Nose
External Snap Ring
Internal Snap Ring
HOW TO USE THIS
MANUAL
Many of the parts and subassemblies of this
transaxle can be removed and serviced in de -
pen dent ly of other components. The dis as -
sem bly, inspection, and as sem bly por tions of
this man u al are therefore laid out in subsec-
tions. Each as sem bly is treated as a unit, and
the dis as sem bly, inspection, and assembly
pro ce dures follow one an oth er.
Where some components and assemblies must
be removed before a given assembly can be
serviced, that information is given at the be-
gin ning of the disassembly instructions.
Subassemblies removed to reach another
com po nent or feature need not be fully dis-
as sem bled. They may be reassembled intact
following the necessary repairs.
Each assembly is provided with an exploded
view showing the parts involved. At the end of
the manual, after the reassembly summary, a
com plete exploded views and items lists are
pro vid ed.
Allen Wrenches
5 mm, 6 mm, 1/4 inch
Sockets
3/8" Drive: 7/16", 1/2", 13/16"
1/2” Drive: 9/16", 15/16", 1-1/8"
#8 Internal Torx Drive
#10 Internal Torx Drive
Socket Drivers
3/8", 1/2"
Combination Wrenches
7/16", 1/2", 9/16", 13/16", 15/16", 1-1/8"
Table 4. Required Tools
Operation
Torque
Item
De
scrip tion
Center Section Screws (Item #4)
525-700 lb-in (59-79 Nm) 44
Screw
Lower Housing Screws (Item # 50) 135-185 lb-in (15-21 Nm) 50
Screw
Charge Pump Cover Screws (Item # 29)
87-108 lb-in (9-12 Nm)
29
M6 x 1-22
Axle Shaft Jam Nut (Item # 73)
660-800 lb-in (75-90 Nm) 73
5/16-18
Right Hand Housing Screws (Item # 80)
230-290 lb-in (26-33 Nm) 80
5/16-18
Axle Hub Nut (Item # 119)
200-295 lb-ft (271-400 Nm) 119
3/4-16
Pulley Nut (Item # 115)
360-520 lb-in (41-59 Nm) 115
Jam Nut
Fan Screws (Item # 107)
35-50 lb-in (4-6 Nm)
107
Screw
Bypass Screw (Item # 138)
42-62 lb-in (5-7 Nm)
138
10-32 x 1/2
Torque Bracket Nut (Item # 142)
160-210 lb-in (18-24 Nm) 142
5/16-18
Control Arm Stud (Item # 36)
50-120 lb-in (6-14 Nm)
36
5/16-24
Trunnion Shaft Nut (Item # 95)
180-240 lb-in (20-27 Nm) 95
5/16-24
Control Bearing Screw(Item # 92)
190-240 lb-in (22-27 Nm) 92
Screw
Control Arm Nut (Item # 95)
85-120 lb-in (10-14 Nm) 95
5/16-24
Adjusting Puck Screw (Item # 88)
250-320 lb-in (28-36 Nm) 88
5/16-24 x 1-3/4
Brake Nuts (Item # 127)
80-120 lb-in (9-14 Nm)
127
1/4-20
Table 5. Required Torque Values