Cub Cadet Medium Frame 3 Stage User Manual
Page 59
700 Series 3-Wheel Track-Drive System
55
10.
Slide the Rear Wheel off of the Rear Axle. See Figure
6.6.
11.
Remove the Rear Wheel.
12.
Lift the Track off of the machine.
13.
Repeat on the opposite side.
To install the tracks:
1.
If the Rear Axle fell out, set the it on the machine so
that the flanges are inside the slots in the Track
Frame. See Figure 6.7.
2.
With the idler hold-down tools still in place, set the
Track on the drive wheel and Front Wheel.
NOTE: Make sure the treads on the Tracks are facing the
right direction. See Figure 6.8.
Figure 6.6
Rear Wheel
Figure 6.7
Rear Axle
Flange
Figure 6.8
Front
Bottom view
This manual is related to the following products:
See also other documents in the category Cub Cadet Special machinery:
- G1332 (20 pages)
- i1046 (36 pages)
- i1046 (32 pages)
- 54M (28 pages)
- 980 (20 pages)
- 949 (20 pages)
- Time Save (28 pages)
- 990 (24 pages)
- 997 (36 pages)
- V469 (20 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (28 pages)
- 4 Fabricated Deck (32 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (36 pages)
- M48-M60-KW (28 pages)
- 4 Fabricated Deck (36 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (32 pages)
- CC 500 BAT (30 pages)
- CC 22 (20 pages)
- CC 949 (13 pages)
- 33" Wide Area (29 pages)
- Z-Wing (88 pages)
- TANK S Series: Electrical System (9 pages)
- TANK S Series: Hydraulic Drive & Steering System (12 pages)
- TANK S Series: Steering System Adjustments (11 pages)
- 640 (20 pages)
- 640 (24 pages)
- 641 (24 pages)
- 641 (20 pages)
- J466 (32 pages)
- Series C460 (28 pages)
- 435A (24 pages)
- 642 (24 pages)
- 414 (24 pages)
- M465 (28 pages)
- Fun Runner (117 pages)
- 4 x 2 Big Country - Steel Bed (38 pages)
- 4 x 2 Big Country - Poly Bed & Steel Bed (82 pages)
- 4 x 4 Volunteer (328 pages)
- 6 x 4 Big Country (121 pages)
- CC 4BP 32cc (29 pages)
- 2518-48 (60 pages)
- 1525 (39 pages)