Cub Cadet Medium Frame 3 Stage - Manual (Page 119)

Discharge Chute and Controls (Joystick, Hex Shaft)
115
NOTE: If working on a 2-way joystick, skip to step 11.
10. Remove the lock nut from the left side housing using
a 1/2” wrench. See Figure 10.28.
11. Remove the eight screws that holds the housing
assembly together using a #2 Phillips screwdriver.
See Figure 10.29.
12. Lift the right housing off of the left housing.
NOTE: If working on a 2-way joystick, skip to step 15.
13. Put an identifying mark on one of the Pitch Cables to
identify which cable goes to which hole. See Figure
10.30.
14. Remove the cables and the Cable Guide.
Figure 10.28
Lock nut
Figure 10.29
Figure 10.30
Identifying Mark
Cable Guide