Cub Cadet Medium Frame 3 Stage User Manual
Cub Cadet Special machinery
Professional Shop Manual
Medium Frame 2 & 3 Stage Snow Throwers
(500, 600 and 700 series)
2005 to present
MTD Products Inc. - Product Training and Education Department
NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals.
These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperi-
enced individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all
instructions and use common sense when working on power equipment. This includes the contents of the product’s Oper-
ators Manual, supplied with the equipment. No liability can be accepted for any inaccuracies or omission in this publication,
although care has been taken to make it as complete and accurate as possible at the time of publication. However, due to
the variety of outdoor power equipment and continuing product changes that occur over time, updates will be made to these
instructions from time to time. Therefore, it may be necessary to obtain the latest materials before servicing or repairing a
product. The company reserves the right to make changes at any time to this publication without prior notice and without
incurring an obligation to make such changes to previously published versions. Instructions, photographs and illustrations
used in this publication are for reference use only and may not depict actual model and component parts.
© Copyright 2013 MTD Products Inc. All Rights Reserved
Document Outline
- Chapter 1: Introduction
- Professional Service Manual Intent
- Safety
- Fasteners
- Assembly Instructions
- Identifying Snow Thrower Series
- Understanding Model And Serial Numbers
- Auger Belt
- Drive Belt
- Auger Control Cable
- Drive Clutch Control Cable
- Auger and Drive Cable Adjustments (500, 600 and 3-wheel Track Drives)
- Auger Cable Adjustments (2-wheel Track Drives)
- Speed Selector Cable
- Speed Selector Rod
- Auger and Drive Lever Interlock
- Chapter 2: Belts And Cables
- Chapter 3: 500 Series Drive System
- Chapter 4: 600 Series Drive System
- Chapter 5: 700 Series 2-Wheel Track-Drive System
- Chapter 6: 700 Series 3-Wheel Track-Drive System
- Chapter 7: Auger Housing and Gear Box
- Skid Shoes
- Skid Shoe Adjustment
- Shave Plate
- Auger Housings
- Auger Assemblies
- 2-Stage Gear Boxes
- 3-Stage Gear Boxes
- Remote Pitch Control Head (Plastic Chutes)
- Remote Pitch Control Head (Steel Chutes)
- Discharge Chute (Manual Crank, Cork Screw Style)
- Discharge Chute (with Remote Head)
- Manual Crank, Cork Screw Style
- Chute Bracket Adjustment
- Remote Head
- Chapter 8: Discharge Chute and Controls (Manual Crank)
- Chapter 9: Discharge Chute and Controls (Joystick, Cable Style)
- Chapter 10: Discharge Chute and Controls (Joystick, Hex Shaft)
- Chapter 11: Discharge Chute and Controls (Electric)