COP-USA USBDVR04SP - Manual (Page 8)

MAXDVR & DR Series Cards 8
Record.
(2) Motion detection mode
Motion detection areas are adjustable and maximum 16 areas for each
channel. Users can also set motion detection sensitivity for each channel. The
system begins to record only when motion of the detected object happens, and
it will stop recording after a certain period, this function is adjustable by users.
(3) Sensor alarm record mode
With extra alarm board, the system enables alarm input and output.
(4) Recycling record mode
Users can set recording storage sequence for HDD partitions. The
recording storage will automatically swap to the next partition when it is full. If
all the partitions are full and recycling record mode is enabled, the former
recorded data will be covered by new data. Users can also set HDD minimum
storage alarm. Then once the present storage space is less then the minimum
storage and recycling record mode is not enabled, the record will automatically
stop.
(5) P.T.Z control function
Support a number of decoders. Users can control multiple speed domes
and integrative cameras, including pan, tilt, zoom, focus and iris adjustment
for P.T.Z devices. Support preset point and auto scout.
(6) Users management
Different users have different rights，user names and passwords, so as to
ensure system security.
(7) Multi-channel display
Support different multi-channel display modes, full screen display and
auto dwell display.
(8) Watch dog function
The 16 Channels card has watchdog function. In case MAXDVR driver or
windows system is frozen, the watchdog will restart the computer and login
MAXDVR system again automatically.