COP-USA USBDVR04SP User Manual
Page 108
MAXDVR & DR
Series
Cards
108
Q: How to setup the web client to monitor from Internet?
A:
- On Main Computer where the DVR card installed:
-
Make sure the computer connected to Internet. DSL or Cable
Modem preferably.
-
Find out your IP address. You can go to this link to find the IP
address http://lawrencegoetz.com/programs/ipinfo/
-
Open up the MAXDVR program and go to basic configuration.
Check and ENABLE Web Camera Service and Remote Play
Back Service.
-
Make Note on Data Port, Command Port and RPB port.
NOTE: IF YOU ARE CONNECTING TO INTERNET by ROUTER,
YOU NEED TO configure THE SETUP OF THE ROUTER AND DO
THE PORT FORWARDING. PORTS THAT NEED TO BE
FORWARDED: 80, 1159, 1259 AND 13551. CHECK YOUR
ROUTER MANUAL ON HOW TO SETUP THAT.
- On Remote Client Computer:
- Minimum Requirement for the client computer:
1. P III 800 MHZ
2. 256 MB RAM
3. Windows 2000 (SP4 min) or Win XP (SP1 min)
4. NVIDIA Video Card with 32 MB min or similar
5. DirectX 9.0 minimum
6. 80 GB HDD