COP-USA USBDVR04SP - Manual (Page 100)

MAXDVR & DR Series Cards 100
Enter the Device Manager and cannot find corresponding DR series
Devices, the possible cause may be as below:
(1) Windows system error. Restart computer.
(2) DR series card error. Change for a valid one.
(3) Install MAXDVR
Appendix 2.2 How to Use MAXDVR
Appendix 2.2.1 Meanings of the indicator lights
Grey－ Normal state
Red—Sensor alarm
Yellow－ Motion detection alarm
Blue－Video loss
Bottle Green－ Manual record state
Reseda－ Schedule record state
Note:
Users can refer to Fig3.6 to learn more.
Appendix 2.2.2 How does the different record format work?
Users can set more than one record modes in Record setup (refer to
Fig3.5), but actually, there is only one valid record mode for recording.
The priority order of the record modes is: Sensor Alarm Record >
Motion Detection Record > Manual Record > Schedule Record
Appendix 2.2.3 How to set recycling record mode on the
system?
Select ‘Recycle’ in basic configuration, refer to Fig4.1.
Users can select multiple HDD partitions to save record files. It won’t